General DescriptionA properly configured STAR 100R is an intelligent PIN & Proximity and PINPAD Single Door Controller that combines the convenience of wireless entry with the security of an alarm system. STAR 100R system will give you field proven reliability and cost-effective solution anywhere access controls and high security are required. Each standard unit can store up to 512 users or card IDs. The task of assigning cards and managing a user’s database is so simple, user friendly, and can be accomplished in many ways; it could be as simple as presenting each card to the unit or as descriptive as a user’s database with an easy to use Graphical User Interface. The STAR 100R can interface and operate with these accessories: Request for EXIT button, Door-Contact sensor, PIR sensor, Fire sensor and other sensors via 5 independent input ports. Also, output ports which include 2 Relays and 2 TTL outputs can be used to control the operation of other accessories such as Electric/Magnetic Door Lock, Alarm, Chime Bell, and Auto-Dialer. Moreover, the status or behaviors of these input and output accessories are configurable to provide the system administrator with complete customized control of the system. Besides the above configurable I/O interfaced behaviors, many of the STAR 100R internal behaviors are programmable as well. The internal operating parameters include the number of incorrect access attempts before alarm condition is triggered, tampering protection from mounting removal, and timers. Furthermore, every event or transaction can be captured and time stamped by the STAR 100R application software via the provided RS-232 wires. Features- Standalone Type of Single Door Access Controller with PIN & Proximity, PINPAD
- Basic Time & Attendance Function
- 512 Card Holders
- Built-in 4”(10cm) RF Reader
- Operation Mode selectable RF Only, PIN (4~6 digits) Only, RF and P/W (4 digits), RF or PIN (4~6 digits)
- External Reader Port for Exit (26Bit Wiegand Format)
- Standalone or Communication via RS232
- Independent 5 Inputs and 4 Outputs including 2 output relays
- All I/O and operating times programmable using keypad
- Try-out error alarm
- Optional 4ch Voice Auto-dialer
- 3 LEDs for system operation status
- Back Lighting on Keypad
- Toggle Mode for Door Opening/Closing
- Function for Lock Control by Door Contact Switch
- Setting for Safe/Secure Mode
- Duress Alarm Function/ Chime Bell Available
Specifications| CPU | Dual 8Bit Microprocessors | | Memory | Program Memory: 20KByte ROM, Data Memory: 2KByte EEPROM | | PIN Number | 512 PIN Numbers | | Read Range | | | IDK50 | 2 inch (5cm) | | IDC170 | 4 inch (10cm) | | IDC80 | 4 inch (10cm) | | IMC125 | 2 inch (5cm) | | IDA150 | 12 inch (30cm) | | IDA200 | 16 inch (40cm) | | Reading Time | 30ms | | Reading Format | PSK Modulation | | Card Holders | 512 Card Holders | | Input Ports | 5 ea | | Output Ports | Relay Output 2ea (COM, NO, NC)
TTL Output 1ea | | Chime Bell Output | 1ea | | External Reader Port | 1 ea (26 Bit Wiegand Format) | | Communication | RS232, Baud Rate: 9600bps | | Keypads | 12Key Numeric Keypad with Back Lighting | | Self Diagnostic | Yes | | LED Indicators | 3 LEDs(Red, Green, Yellow) | | Power | DC12V, Max.200mA | | Operation Environment | -35°C ~ +65°C(-31°F~+149°F), 10% ~ 90% RH(Non-Condensing) | | Reset | Watch-Dog Timer & Power on Reset | | Color | Dark Pearl Gray |
Accessories Required for a Typical Functional System| Description | Part No. | Quantity per System | | Door Lock | | 1 ea | | Alarm Device | | 1 ea | | Exit Button | | 1 ea | | Door Contact | | 1 pair | | Chime Bell | | 1 ea | | Another Compatible Wiegand Reader | | Optional | | Auto-Dialer | | Optional | | Power Cable | | 10 mts (minimum) | | Signal Cable | | 50 mts | | Installation hardware and consumables | | 1 set (By installation contractor / others) |
|
